Shank type Cutter Z3 Mach 3.2

• CNC routers: for sizing and dividing

• Material processing of: particleboard both raw or with melamine-, paper-, HPL-, foil-laminates; real wood veneer panels Design

• 3 DP cutting edges with special P-SERIES protective coating

• Shear angle: 20°

• Solid carbide body

• Helical flute with alternating high shear angle (positive/negative) for top and bottom finish

• Typical n° of service cycles ~ 3-4

Shank type Cutter Z3 Positive Mach 3 Evo

• CNC routers: for sizing and dividing

• Suitable for all materials used in the furniture industry, including solid laminates and Trespa Design

• 3 DP cutting edges with P-SERIES special protective coating

• Shear angle: 30°

• Prevailing positive shear for efficient dust evacuation

• Typical n° of service cycles ~ 6-8

Shank type Cutter Z3 Negative Mach 3 Evo

• CNC routers: for sizing and dividing

• Material processing of: particleboard and MDF boards, both raw or with melamine, paper, HPL, foil-laminates; real wood veneer panels and solid hard woods Design

• 3 DP cutting edges with special P-SERIES protective coating

• Shear angle: 30°

• Prevailing negative flute

• Typical n° of service cycles ~ 6-8

Shank type Cutter Z2+2 Mach 2

• CNC routers: for sizing and dividing

• Material processing of: particleboard and MDF boards, both raw or with melamine, paper, HPL, foil-laminates; real wood veneer panels and solid hard woods Design

• Shear angle: 18°

• Typical n° of service cycles ~ 3-4

Shank type Cutter Z2+1 Mach 1 Evo

• CNC routers: for sizing and dividing

• Material processing of: particleboard and MDF boards, both raw or with melamine, paper, HPL, foil-laminates; real wood veneer panels and solid hard woods Design

• Innovative Z2+1 design

• Diamond cutters with P-SERIES special protective coating

• Shear angle: 18° for Ø up to 12,7 mm ; 25° for Ø 16 mm ; 30° for Ø 18-20 mm

• Typical n° of service cycles ~ 3-4

Shank Type Cutter Z1+1 Mach 1

• CNC routers: for jointing, rabbeting, grooving and copying

• Material processing of: particleboard and MDF boards, both raw or with melamine, paper, HPL, foil-laminates; real wood veneer panels and solid hard woods Design

• Shear angle: 12° for Ø up to 12,7 mm ; 18° for Ø 14-20 mm

• Typical n° of service cycles for 2 mm tip ~ 1-2 (for Ø up to 12,7 mm)

• Typical n° of service cycles for 3 mm tip ~ 3-4 (for Ø > 12,7 mm)